No products in the basket.
Speed Bumps
Showing all 8 results
-
Speed Bumps
10mph Speed Ramp Kit
For speed reduction, this 50mm profile dictates a 10mph speed control. Heavy Duty recycled rubber moulded sections. Complete with fixing bolts suitable for concrete or tarmac/asphalt surfaces (select desired surface when ordering). Cat’s eyes, mid section only.? Included tapered ends neatly complete a run. Each section is 500mm x 350mm.
Ideal for use in car parks for slowing traffic to approx. 10mph, improving safety for pedestrians and drivers.
SKU: n/a -
Speed Bumps
5mph Speed Ramp Kit
For maximum speed reduction, steep profile of 70mm dictates 5mph speed control. Heavy Duty recycled rubber moulded sections. Comes with fixing bolts suitable for concrete and tarmac/ashpalt surfaces (select desired surface when ordering). Central slot of 25mm (W) x 25mm (H) allows cables to run underneath ramp (not on tapered ends). Cats eyes in speed ramp mid sections only. One of the best traffic calming measures.
Ideal for reducing vehicle speed to 5pmh in car parks and other high vehicle traffic areas, increasing pedestrian and driver safety.
SKU: n/a -
Speed Bumps
Flow Plate
Ideal for entrances & exits for cars & light commercial vehicles. Helps to enforce one-way traffic flow. 95H x 390W x 550Dmm. Unsuitable for low suspension cars unless 10mm base plate is embedded. Available in safety yellow. Bolts for concrete or tarmac are also included (please specify when ordering). Much easier to install than ‘sunken’ flow plates. Product weight: 24.2kg.
SKU: n/a -
Cable Protectors, Speed Bumps
External Budget Cable Protector
Tough rubber extrusion cable protection to protect cables where they need to withstand vehicular traffic. Suits all weights of vehicle. Easy access for installation and removal of top cable. Top channel 15mm and the bottom 2 channels 10mm. Supplied by the metre, or in economical 10 metre rolls. Easy to cut but we can cut to different lengths if stated on order form.
SKU: n/a -
Cable Protectors, Speed Bumps
External Heavy Duty Cable Protector
Instant cable protection outdoor events and building site works. Mouldings can interlink to form continuous ramped cable protector. Hinged lid allowing cable insertion when ramps are in position. Linked sections usually don’t require ground fixings. Bolt holes provided for more permanent installations. 3 generous cable channels (each 55H x 65Wmm) allow a variety of cables and hoses. Robust design for heavy goods. Traffic tested with axle loads up to 6000kg.
SKU: 04-191 -
Cable Protectors, Speed Bumps
Hose Protector
Ideal for temporary or semi-permanent use. Suitable for hoses and large cables. Heavy duty rubber moulding. Two open channels (up to 75mm diameter). 300mm width. For example a 3m length would require 10 pieces. Reflective strips. The Hose Protector reduces traffic speed. Quick and easy to put in place – pieces easily join together. Recommended maximum speed 5mph. Suitable for HGV use.
SKU: 04-194 -
Cable Protectors, Speed Bumps
Industrial Cable Protector
9 metre lengths, manufactured specifically to cover heavy duty power cables even when situated in harsh conditions. Unaffected by heavy wheeled traffic. Tested for non conductivity to BS903-C5. Fire retardant to BS476 Part 7 Class 3. No fixing needed.
SKU: n/a -
Cable Protectors, Speed Bumps
Pedestrian Cable Cover
Two generous channels allowing cables to be inserted (each 25 x 25mm). Plastic hinged lid. The base of this product is made from heavy duty rubber moulding. Supplied in sections of 990 x 245 x 45mm. Designed 45mm high. Dimensions 1000L x 250Wmm. Ideal for events and festivals (not suitable for cars). Product weight: 6.6kg.
SKU: 04-188
